This section is under construction

This section is under construction

This section is under construction

MDML Series
Moritex has developed a line of dome light type LEDs. The MDML Series LEDs have been designed to evenly illuminate object surfaces by reflecting on the dome inbound light fibers arranged at 360° angles along the lower section of the dome. These dome LEDs are useful in the inspection of curved metal surfaces as well as printed surfaces (i.e. the bottom of aluminum cans). Two different size of dome LEDs are available, each in four different wavelengths: red, green, blue, and white.

MCBP Series

Moritex has now developed Parallel Lighting LEDs for profile inspection. Moritex’s MCBP Series Parallel Backlight LEDs enable the profiles of objects to be captured with high precision. Such profiling applications were difficult with conventional lights because the light was projected from the rear.

With these LEDs, the light is projected horizontally along the package and then reflected down vertically. The MCBP series LEDs are ideal for measuring the dimensions of raised objects as well as the recognition of alignment marks on glass substrates.

This section is under construction

Standard MLNL

Low Profile MBRC

High Power MLNX

The Moritex MME-252 Metal Halide light Source was made for high speed high brightness applications.
Multipile units can be combined using our Bi/Multi-furcated light guides to increase the light power if needed.

For more information and spectral characteristics please download our full catalogue from the Illumination section.

The MHAB-100W-IR light source is based on our standard 100W Halogen light source. This light source is effective not only for Si, but also for compound semiconductors. It can be used for many applications such as wafer on wafer alignment, MEMs inspection, and void inspection. LM-100-IR 100W spare lamps for the MHF-D100LR-IR are also available.

Features include:
Si penetration wave (~1127nm) radiated
Original heat radiation mechanism
Average lamp life of 1,000 hours
Manual & remote light control
Optional 8 bit digital light control

(Note: Spectral characteristics available on downloadable specifications.)

The MSPP-CX42 is a IP67 compliant water resistant LED lighting unit 42mm in diameter.
Long lifetime, low maintainance and high efficiency and uniformity make this unit ideal for the food packaging industry.

Availiable in Red, Green, Blue and White

Working Distance Area
0.5m 80-230mm
1m 170-400mm
2m 300-900mm

The MSPP-CX74 has all the same characteristics of the MSPP-CX42 but with a lower illumination angle.

Working Distance Area
0.5m 30-130mm
1m 70-210mm
2m 150-380mm

Please download the Catalogue from the Illumination section for more details.